BMWDR - SOAP TOILET TYPE 1
- MSDS: BMWDR
- Manufacturer: KELLER RECKITT AND COLMAN INC
- Product Name: SOAP TOILET TYPE 1
- National Stock Number: 8520-00N029825
Product Identification
Product ID:SOAP TOILET TYPE 1
MSDS Date:09/28/1991
FSC:8520
NIIN:00N029825
MSDS Number: BMWDR
Responsible Party
MAKATI, M.M.
PI
Emergency Phone: 810-02-01 TO 21
Info Phone: 810-02-01 TO 21
Cage: KELLR
Contractor
Telephone: 810-02-01 TO 21
Cage: KELLR
Ingredients
SODIUM LAURYL SULFATE (ETHYL)
Fraction By Weight: 10%
ETHANOL,2,2'-IMINODI-; (DIETHANOLAMINE), (COCONUT
CAS: 111-42-2
RTECS: KL2975000
Fraction By Weight: 4%
OSHA PEL 3 PPM
ACGIH TLV: 3 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 0.05%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:CONTACT WITH EYES IS IRRITATING AND
PAINFUL.
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2 (NTP), GROUP 2A
(IARC) , OSHA REGULATED.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
INGEST: FLUSH ORAL CAVITY, DRINK PLENTY OF WATER, SEE MD
IMMEDIATELY. SKIN: RINSE WITH RUNNING WATER AND REMOVE CONTAMINATED
CLOTHING. INHAL: REM OVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O2/ARTF RESP) .
Fire Fighting
Flash Point Method:COC
Flash Point:NONE TO BOILING
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM IN WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SOAK UP WITH ABSORBANT, SHOVEL INTO WASTE
CONTAINER AND FLUSH AREA WITH PLENTY OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:SPILLED MATERIAL IS SLIPPERY.
Exposure Controls
Respiratory Protection:IN ABSENCE OF NORMAL VENTILATION, USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: NORMAL VENTILATION IS CONSIDERED
SATISFACTORY.
Protective Gloves:IMPERVIOUS GLOVES (RUBBER OR LATEX).
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:ALWAYS HANDLE PRODUCT WITH CARE. RINSE HAND
THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:T7
Boiling Pt:B.P. Text:194F,90C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:1.01 (H2O=1)
Evaporation Rate & Reference:0.01 (BUTYL ACETATE=1)
Solubility in Water:COMPLETELY SOLUBLE
Appearance and Odor:CLEAR SOLUTION; SCENTED.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID REACTION WITH STRONG OXIDIZING AGENT.
Stability Condition to Avoid:NONE KNOWN.
Disposal
Waste Disposal Methods:DISPOSE MATERIAL (INCINERATION IS PREFERRED) IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE OR LOCAL REGULATION.
MATERIALS COLLECTED WITH ABSORBANT MAY BE DISPOSED IN A PERMITTED
LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.